Fife SE-26 Line Guide Sensor

SE-26 Line Guide Sensor

The SE-26 Line Guide Sensor is a compact, easy to use, center-of-line or edge-of-line sensor capable of reliable operations on smooth, rough, matte, or shiny web surfaces. This sensor is especially good in applications that have low color contrast between the background and the printed line, and particularly useful when guiding to the edge of a clear film web on a roller or backup plate.

The SE-26 will guide line widths from 1 mm (0.04 inch) to 2.5 mm (0.10 inch) with a narrow clear margin of only 2.5 mm (0.10 inch) on both sides of the line.

This reflected light-type sensor contains the light source and receiver located in a common housing. Light is reflected from the surface of the web back through the lens to a dual solar cell receiver where an internal cell automatically compensates for changes in light intensity.

Key Features:

  • Small, lightweight sensor for guiding to the center or edge of a line
    Especially good in applications where contrast between background and printed line is low
    Provides reliable operation for glossy, reflective or shiny materials
    Lens position may be altered to allow the sensor to operate at 90 degrees

Specifications:

  • Power Required: +/- 12 VDC and +4.5 VDC
    Output Signal: 0 to +/- 20 mA
    Light Footprint: 1.5 mm x 5.1 mm 0.06 inch x 0.20 inch
    Focus Distance: 8 mm 0.32 inch
    Weight: 396.9 grams 14 ounces
    Weight (with mounting bracket) 907.2 grams 32 ounces
    Temperature Range: 5º to 50º C 32º to 122º F

Documents:

Please log in or create an account to download this protected document.