Advanced Slitting and Winding Solutions

Fife LAB-10 Electromechanical Actuator

The LAB-10 offers a variety of gear ratios to meet the needs of most applications. Standard actuator strokes range from 25.4 mm to 254 mm (1 inch to 10 inches) in 25.4 mm (1 inch) increments.

Ball screw and nut design provides low-friction, efficient operation, and eliminates the typical end of stroke sticking and/or the need for actuator limit switches. For use with Fife’s CDP-01 or CSP-01 web guide controllers, this versatile actuator is widely used for steering guides, displacement guides, and unwind/rewind applications.

Key Features

Flexible actuator provides a variety of gear ratios
Reliable, accurate operation-shifting speeds
Efficient two-belt drive with shiftable loads up to 3,810 kg (8,400 lbs)
Clean, electronic operation
Durable construction for continuous-duty reliability
Nonsticking end-of-stroke design
No limit switches required

Specifications

	LAB-10-5	LAB-10-7	LAB 10-9
Gearing Ratio	5:1	7:1	9:1
Motor Amps	2.6	2.6	2.6
Maximum Design Thrust	1.957 N (440 lbf)	2,847 N (640 lbf)	3,736 N (840 lbf)
Maximum Shifting Speed	23 mm/sec (0.95 inch/second)	17 mm/sec (0.70 inch/second)	14 mm/sec (0.55 inch/sec)
Maximum Shiftable Loads (using anti-friction bearings)	1,996 Kg (4,400 lbs)	2,903 Kg (6,400 lbs)	3,810 Kg (8,400 lbs)